September 2

Release 122.20140901 (Only R6300v1,WNDR4500v1/v2)

Lots of thanks for SZPunk‘s donation. His donation of WNDR4500 help me to finish this firmware.6

In case that Shibby do not publish ARM source code, I have to prepare to develop K26ARM by myself.  Thanks SZPunk again for his donation of router WZR-600DHP2.  It’s really timely help.

  • Openssl Update to 1.0.1i,fix many security issues;
  • lzo update to 2.0.8
  • Support Netgear R6300v1, WNDR4500v1, WNDR4500v2
  • Fixed:

– All vlans fixed.
– R6300v1: Wireless button works, power light works, 2.4G/5G lights works, USB lights works
– WNDR4500v1/v2: Wireless button works, Logo lights works, power light works, 2.4G/5G light works

  • Known BUGs:

– R6300v1: USB light and Internet light not work
– WNDR4500v1/v2: WAN light and LAN lights not work

Attentions:

Pls. upgrade directly from original factory WEB GUI.
Press RESET button to reboot after finished upgrade.
Then select 5G band, save then reboot again. Tomato24 and Tomato50 will occure.


Posted 2014/09/02 by 川山月 in category "Original", "Tomato Software

16 COMMENTS :

  1. By Juliano on

    Hi Bao

    First congratulatinos for your work, i noted that in firmware 122 we only have chinese version the folder EN is empty do you have firmware 122 in english version ?

    I am one tomato user i have one R6300v1 with original firmware

    Thanks a lot

    Juliano

    Reply
    1. By bwq518 (Post author) on

      Since some new features will be added to 122 version, I only compiled 122 for Netgear. Others models will be supported in coming days.
      Thanks.

      Reply
  2. By Juliano on

    Hi Bao
    I really liked your firmware, but how do I get back to the factory default firmware?
    The Model is R6300V1 Netgear

    Thanks a lot

    Juliano

    Reply
      1. By Juliano on

        Hi Bao

        OK Thanks, I’ll do it through the web interface TOMATO

        Again congratulations for his work with TOMATO bwq518

        Best Regards

        Juliano

        Reply
  3. By Juliano on

    I am using your firmware since 2014/09/15, and this firmware is solid as rock, everthing OK…

    My Router is one Netger R6300v1

    Thanks for your excellent work with this firmware

    Best Regards

    JulianoCWB

    Reply
  4. By Vivian on

    Is it correct that your firmware is based on tomato shibby? Because I saw in this shibby changelog that there is a fix ([RELEASE] 123 FIX2) for ac wireless when using 80Mhz channel width. I’m unable to use it at the moment so I wanted to ask if you are planing to release newer versions some day. It is not important but would be nice. And thanks again for your work.

    Reply
    1. By Vivian on

      It seems that this was a problem with the router not the firmware. I did a hard reset and now it works. with my ac 866mbit adapter i now get nearly the same results than with the factory firmware. here are some pictures (avg shows the average over about 5min):
      factory throughput and tomato throughput

      Reply
    2. By Stefan on

      I cannot get 80MHz to work on this at all with my R6300v1.

      If I select 40MHz, all is OK except speed is obviously not as good.

      If I select 80MHz, I cannot select a channel and if I leave all at Auto, it seems that it just remembers previous setting and makes no change – I still get same speeds as 40MHz.

      Stock firmware works fine up to 866Mbps.

      I changed from DD-WRT to Tomato to try to fix this same problem – DD-WRT has never given me good wireless speeds. Router has been stable with both DD-WRT and Tomato.

      I’m considering buying a new router just to solve this!

      Reply
  5. By JulianoCWb on

    Hi
    Do you have uptade this firmware Tomato to R6300 ?

    Thanks a lot

    JulanoCWB

    Reply
  6. By Hi on

    Hi
    Do you have one update this firmware to R6300v1 ?

    Thanks a Lot

    Best Regards

    Juliano Baccon

    Reply
  7. By Shane W. on

    When i tried this upgrade, AC wireless is not showing as an option under “wireless network mode”.

    Any ideas?

    SW

    Reply
  8. By Shane W. on

    Never mind I got it. Leave the wireless network mode as auto and change to channel width to 80mhz.

    Thanks again for the great work.

    Reply
  9. By Dean Penderghast on

    I’m using a Netgear WNDR3400 V1 and want to install your firmware. I downloaded the file tomato-K26-1.28.117-MIPSR2-20140420.Hyzoom.RT-4M-Mini.trx off the website but the router won’t upload that file via the factory firmware. It keeps asking for a CHK file. I renamed your file to .CHK and it still didn’t work.

    Do you have a .CHK file build for these Netgear routers or can you tell me how to convert your .TRX to a .CHK file?

    Reply

Leave a Reply to Juliano Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.