September 2

Release 122.20140901 (Only R6300v1,WNDR4500v1/v2)

Lots of thanks for SZPunk‘s donation. His donation of WNDR4500 help me to finish this firmware.6

In case that Shibby do not publish ARM source code, I have to prepare to develop K26ARM by myself.  Thanks SZPunk again for his donation of router WZR-600DHP2.  It’s really timely help.

  • Openssl Update to 1.0.1i，fix many security issues；
  • lzo update to 2.0.8
  • Support Netgear R6300v1, WNDR4500v1, WNDR4500v2
  • Fixed:

– All vlans fixed.
– R6300v1: Wireless button works, power light works, 2.4G/5G lights works, USB lights works
– WNDR4500v1/v2: Wireless button works, Logo lights works, power light works, 2.4G/5G light works

  • Known BUGs:

– R6300v1: USB light and Internet light not work
– WNDR4500v1/v2: WAN light and LAN lights not work

Attentions:

Pls. upgrade directly from original factory WEB GUI.
Press RESET button to reboot after finished upgrade.
Then select 5G band, save then reboot again. Tomato24 and Tomato50 will occure.


Posted 2014/09/02 by 川山月 in category "Original", "Tomato Software

16 COMMENTS :

  1. By Juliano on

    Hi Bao

    First congratulatinos for your work, i noted that in firmware 122 we only have chinese version the folder EN is empty do you have firmware 122 in english version ?

    I am one tomato user i have one R6300v1 with original firmware

    Thanks a lot

    Juliano

    Reply ↓
    1. By bwq518 (Post author) on

      Since some new features will be added to 122 version, I only compiled 122 for Netgear. Others models will be supported in coming days.
      Thanks.

      Reply ↓
  2. By Juliano on

    Hi Bao
    I really liked your firmware, but how do I get back to the factory default firmware?
    The Model is R6300V1 Netgear

    Thanks a lot

    Juliano

    Reply ↓
      1. By Juliano on

        Hi Bao

        OK Thanks, I’ll do it through the web interface TOMATO

        Again congratulations for his work with TOMATO bwq518

        Best Regards

        Juliano

        Reply ↓
  3. By Juliano on

    I am using your firmware since 2014/09/15, and this firmware is solid as rock, everthing OK…

    My Router is one Netger R6300v1

    Thanks for your excellent work with this firmware

    Best Regards

    JulianoCWB

    Reply ↓
  4. By Vivian on

    Is it correct that your firmware is based on tomato shibby? Because I saw in this shibby changelog that there is a fix ([RELEASE] 123 FIX2) for ac wireless when using 80Mhz channel width. I’m unable to use it at the moment so I wanted to ask if you are planing to release newer versions some day. It is not important but would be nice. And thanks again for your work.

    Reply ↓
    1. By Vivian on

      It seems that this was a problem with the router not the firmware. I did a hard reset and now it works. with my ac 866mbit adapter i now get nearly the same results than with the factory firmware. here are some pictures (avg shows the average over about 5min):
      factory throughput and tomato throughput

      Reply ↓
    2. By Stefan on

      I cannot get 80MHz to work on this at all with my R6300v1.

      If I select 40MHz, all is OK except speed is obviously not as good.

      If I select 80MHz, I cannot select a channel and if I leave all at Auto, it seems that it just remembers previous setting and makes no change – I still get same speeds as 40MHz.

      Stock firmware works fine up to 866Mbps.

      I changed from DD-WRT to Tomato to try to fix this same problem – DD-WRT has never given me good wireless speeds. Router has been stable with both DD-WRT and Tomato.

      I’m considering buying a new router just to solve this!

      Reply ↓
  5. By JulianoCWb on

    Hi
    Do you have uptade this firmware Tomato to R6300 ?

    Thanks a lot

    JulanoCWB

    Reply ↓
  6. By Hi on

    Hi
    Do you have one update this firmware to R6300v1 ?

    Thanks a Lot

    Best Regards

    Juliano Baccon

    Reply ↓
  7. By Shane W. on

    When i tried this upgrade, AC wireless is not showing as an option under “wireless network mode”.

    Any ideas?

    SW

    Reply ↓
  8. By Shane W. on

    Never mind I got it. Leave the wireless network mode as auto and change to channel width to 80mhz.

    Thanks again for the great work.

    Reply ↓
  9. By Dean Penderghast on

    I’m using a Netgear WNDR3400 V1 and want to install your firmware. I downloaded the file tomato-K26-1.28.117-MIPSR2-20140420.Hyzoom.RT-4M-Mini.trx off the website but the router won’t upload that file via the factory firmware. It keeps asking for a CHK file. I renamed your file to .CHK and it still didn’t work.

    Do you have a .CHK file build for these Netgear routers or can you tell me how to convert your .TRX to a .CHK file?

    Reply ↓

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.